FGSW-2622VHP Planet Коммутатор 24-Port 10/100TX 802.3at PoE + 2-Port Gigabit TP/SFP Combo Ethernet Switch with LCD PoE Monitor (300W)

FGSW-2622VHP Planet Коммутатор 24-Port 10/100TX 802.3at PoE + 2-Port Gigabit TP/SFP Combo Ethernet Switch with LCD PoE Monitor (300W)
39890.00 ₽
Производитель : Planet
Количество портов : 24

Коммутатор FGSW-2622VHP, 24 порта 10/100TX с 802.3at PoE, 2 порта Gigabit TP/SFP combo, LCD-дисплей, бюджет PoE 300 Вт, питание 100~240V AC, установка в стойку, 0С~50C


Металлический корпус


корпусные вентиляторы

Возможности монтажа

установка в стойку

Общее количество портов Ethernet


Порты 10/100Base-TX с функцией PoE


Порты Gigabit Ethernet


Порты SFP

2 x 1000BASE-X SFP (совмещены с медью)

Бюджет PoE

300 Вт

Мощность на порт PoE

11 x 30 Вт, 23 x 15 Вт, 24 x 7 Вт

Пропускная способность

8,8 Гбит/с

Тип коммутатора

Store and Forward

Таблица адресов

4 К

Управление потоком

IEEE 802.3x pause frame for full-duplex, Back pressure for half-duplex

Тип источника питания


Диапазон входного напряжения

100~240 AC В

Дополнительные функции

LCD дисплей

Потребляемая мощность

30 Вт

Рабочая температура, град. C

0 ~ 50

Относительная влажность, %

5 ~ 90

Габаритные размеры (ДxШxВ), мм

440 x 233 x 44

Вес, кг.


Cost-effective Integration Solution for Secure IP Surveillance Infrastructure

PLANET FGSW-2622VHP is an ideal Plug and Watch Power over Ethernet solution which provides quick installation, real-time PoE work status monitoring and immediate troubleshooting through its unique LCD display to improve work efficiency and quality without any PC or software required.

The FGSW-2622VHP is equipped with 24 10/100BASE-TX ports featuring 30-watt 802.3at Power over Ethernet Plus (PoE+) copper interfaces and 2 Gigabit TP/SFP combo interfaces with inner power system. With a total PoE power budget of up to 300 watts and non-blocking data switching performance, the FGSW-2622VHP fulfills the demand of sufficient PoE power for HD IP surveillance. It offers a desktop-sized, reliable and visible power solution for small and medium-sized businesses and system integrators deploying Power over Ethernet networks.

LCD Monitor for Real-time PoE Usage and System Status Display

The LCD monitor of the FGSW-2622VHP clearly shows the PoE loading of each port, total PoE power usage and system status, such as overload, low voltage, over voltage and high temperature. With its brand-new LCD monitor, user is able to obtain detailed information about real-time PoE working condition of the FGSW-2622VHP directly. Also the Power Budget Control function helps to prevent power budget overloading.

02.3at PoE+ Power and VLAN Isolation Operation Mode

The built-in solid DIP switch provides “Standard” and “VLAN” operation modes. The FGSW-2622VHP operates as a normal IEEE 802.at/af PoE Switch in the “Standard” operation mode. The “VLAN” operation mode features with port-based VLAN function that can help to prevent the IP camera’s multicast or broadcast storm from influencing each other.

Flexible and Extendable Two Gigabit Uplink Solution

The FGSW-2622VHP provides 2 extra Gigabit TP/SFP combo interfaces supporting 10/100/1000BASE-T RJ45 copper for surveillance network devices such as NVR, video streaming server or NAS to facilitate surveillance management.

Or through these Gigabit speed fiber SFP slots, the 1000BASE-SX/LX SFP (Small Form-factor Pluggable) fiber transceiver is inserted to be uplinked to a backbone switch and monitoring center over a long distance. The distance can be extended from 550m to 2km (multi-mode fiber), even going up to above 10/20/30/40/50/60/70/120km (single-mode fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions.

Robust Protection

The FGSW-2622VHP provide contact discharge of ±4KV DC and air discharge of ±6KV DC for Ethernet ESD protection, also supports ±4KV Surge Immunity to improve product stability and protects users’ networks from devastating ESD attacks, making sure the flow of operation does not fluctuate.

Easy Installation and Cable Connection

As data transfer and high power PoE are transmitted over a cable, the FGSW-2622VHP is able to reduce the need of extended cables and electrical outlets on the wall, ceiling or any unreachable place. It helps to lower the installation costs and simplify the installation effort. All RJ45 copper interfaces of the FGSW-2622VHP support 10/100Mbps and 10/100/1000Mbps auto-negotiation for optimal speed detection through RJ45 Category 6, 5 or 5e cable. It also supports standard auto-MDI/MDI-X that can detect the type of connection to any Ethernet device without requiring special straight-through or crossover cables.

Physical Port

  • 24-port 10/100BASE-TX Fast Ethernet RJ45 copper
  • 2 10/100/1000BASE-T TP and 2 1000BASE-X mini-GBIC SFP shared combo interfaces

Power over Ethernet

  • Complies with IEEE 802.3af/at Power over Ethernet end-span PSE
  • Up to 24 ports of IEEE 802.3af/802.3at devices powered
  • Supports PoE Power up to 30.8 watts for each PoE port
  • Each port supports 54V DC power to PoE Powered Device
  • 300-watt PoE budget
  • Auto detects powered device (PD)
  • Circuit protection prevents power interference between ports
  • Remote power feeding up to 100m with standard mode


  • Hardware based 10/100Mbps or 10/100/1000Mbps auto-negotiation and auto MDI/MDI-X
  • Flow control for full duplex operation and back pressure for half duplex operation
  • Integrates address look-up engine, supporting 4K absolute MAC addresses
  • IEEE 802.1Q VLAN transparency
  • Hardware DIP switch for “Standard” and “VLAN” mode selection, the “VLAN” mode for IP surveillance application
  • Solid DIP switch to isolate ports to prevent broadcast storm and defend DHCP spoofing
  • Automatic address learning and address aging


  • 19-inch desktop size, 1U height, rack mountable
  • LED indicators for system power, per port PoE ready and PoE activity, speed, Link/Act
  • LCD monitor for system status and PoE usage status display
  • 2 silent fans to provide stable and efficient power performance
  • Supports Contact Discharge of ±4KV DC and Air Discharge of ±6KV DC for Ethernet ESD protection
  • Supports ±4KV Surge Immunity

Hardware Specifications

802.3af/802.3at PoE Injector Port


10/100BASE-TX MDI/MDIX Ports


10/100/1000BASE-T MDI/MDIX Ports

2 (Combo Port)

1000BASE-X SFP/mini-GBIC Slots

2 (Combo Port)

DIP Switch

1 for standard mode/VLAN mode operation

Switch Architecture


Switch Fabric


Switch Throughput@64 bytes


MAC Address Table

4K entries

Maximum Frame Size

1536 bytes

Flow Control

IEEE 802.3x pause frame for full-duplex; back pressure for half-duplex



Power (Green)

10/100BASE-TX RJ45 Interfaces:

10/100Mbps LNK/ACT (Green)

PoE-in-Use (Orange)

10/100/1000BASE-T RJ45/SFP Interfaces:

LNK/ACT (Green)

100/1000 (Green)

LCD Monitor

■ Total PoE budget

■ Total PoE usage

■ Per port PoE usage

■ PD light load protection/PD over load protection

■ Short-circuit protection(SCP)

■ Low voltage alarm, high voltage alarm

Refresh PoE status display every 10 seconds

Dimensions (W x D x H)

233 x 440 x 44 mm (1U height)





Power Requirements

AC 100~240V, 50/60Hz, 5A max.

Power Consumption/Dissipation

Max. 330 watts/1125 BTU

Thermal Fan


ESD Protection

Contact Discharge of ±4KV DC
Air Discharge of ±6KV DC

Surge Immunity


Power over Ethernet

PoE Standard

IEEE 802.3af Power over Ethernet/PSE
IEEE 802.3at Power over Ethernet Plus/PSE

PoE Power Supply Type


PoE Power Output

Per port 54V DC, 300mA. max. 15.4 watts (IEEE 802.3af)
Per port 54V DC, 600mA. max. 30 watts (IEEE 802.3at)

Power Pin Assignment

1/2(+), 3/6(-)

PoE Power Budget

300 watts

Max. Number of Class 2 PDs


Max. Number of Class 3 PDs


Max. Number of Class 4 PDs


Standards Conformance

Regulatory Compliance

FCC Part 15 Class A, CE

Standards Compliance

IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX
IEEE 802.3ab Gigabit 1000BASE-T
IEEE 802.3z Gigabit SX/LX
IEEE 802.3x flow control and back pressure
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus



Temperature: 0 ~ 50 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)


Temperature: -10 ~ 70 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)