GS-4210-24UP4C Planet Коммутатор 24-Port 10/100/1000T Ultra PoE + 4-Port Gigabit TP/SFP Combo Managed Switch

GS-4210-24UP4C Planet Коммутатор 24-Port 10/100/1000T Ultra PoE + 4-Port Gigabit TP/SFP Combo Managed Switch
82337.00 ₽
Количество портов : 24
Производитель : Planet

Управляемый коммутатор GS-4210-24UP4C уровня L2, 24 порта 10/100/1000T с Ultra PoE, 4 порта TP/SFP, бюджет PoE 600 Вт, консольный порт, питание 100~240V AC, установка в стойку, 0С~50C

 

Конструкция

Металлический корпус

Охлаждение

корпусные вентиляторы

Возможности монтажа

установка в стойку

Общее количество портов Ethernet

28

Порты Gigabit Ethernet

4

Порты Gigabit Ethernet с функцией PoE

24

Порты SFP

4 x 100/1000BASE-X SFP (совмещены с медью)

Бюджет PoE

600 Вт

Мощность на порт PoE

10 x 60 Вт, 20 x 30 Вт, 24 x 15 Вт

Консольный порт

RS-232 (RJ45)

Пропускная способность

56 Гбит/с

Тип коммутатора

Store and Forward

Таблица адресов

8 К

Управление потоком

IEEE 802.3x pause frame for full-duplex, Back pressure for half-duplex

Тип источника питания

Внутренний

Диапазон входного напряжения

100~240 AC В

Потребляемая мощность

140 Вт

Рабочая температура, град. C

0 ~ 50

Относительная влажность, %

5 ~ 90

Габаритные размеры (ДxШxВ), мм

440 x 300 x 44

Вес, кг.

4,5

A New Generation Ultra PoE Managed Switch with Advanced L2/L4 Switching and Security

PLANET GS-4210-24UP4C is a cost-optimized, 1U, Gigabit Ultra PoE Managed Switch featuring PLANET intelligent PoE functions to improve the availability of critical business applications. It provides IPv6/IPv4 dual stack management and built-in L2/L4 Gigabit switching engine along with 24 10/100/1000BASE-T ports featuring 60-watt Ultra PoE and 4 additional Gigabit TP/SFP combo ports. With a total power budget of up to 600 watts for different kinds of PoE applications, respectively, the GS-4210-24UP4C provides a quick, safe and cost-effective Ultra PoE network solution for small businesses and enterprises.

60 Watts of Power over 4-pair UTP
The GS-4210-24UP4C Ultra PoE solution adopts the IEEE 802.3at/af standard. Instead of delivering power over 2-pair twisted UTP – be it end-span (Pin 1,2,3 and 6) or mid-span (Pin 4,5,7 and 8), it provides the capability to source up to 60 watts of power by using all the four pairs of standard Cat.5e/6 Ethernet cabling. In the new 4-pair system, two PSE controllers will be used to power both the data pairs and the spare pairs. It can offer more PoE applications, such as:

  • PoE PTZ speed dome
  • Any network device that needs higher PoE power to work normally
  • Thin-client
  • AIO (All-in-One) touch PC
  • Remote digital signage display

Built-in Unique PoE Functions for Powered Devices Management

As it is the managed PoE switch for surveillance, wireless and VoIP networks, the GS-4210-24UP4C features the following special PoE management functions:

  • PD alive check
  • Scheduled power recycling
  • PoE schedule
  • PoE usage monitoring

 

Intelligent Powered Device Alive Check

The GS-4210-24UP4C can be configured to monitor connected PD (Powered Device) status in real time via ping action. Once the PD stops working and responding, the GS-4210-24UP4C will resume the PoE port power and bring the PD back to work. It will greatly enhance the network reliability through the PoE port resetting the PD’s power source and reducing administrator management burden.

Scheduled Power Recycling

The GS-4210-24UP4C allows each of the connected PoE IP cameras or PoE wireless access points to reboot at a specified time each week. Therefore, it will reduce the chance of IP camera or AP crash resulting from buffer overflow.

Ultra PoE Networking Solution

PLANET GS-4210-24UP4C can easily build an Ultra PoE networking solution on the cyber security system for the enterprises. For instance, it can work with the POS system and thin client to perform comprehensive security protection for today’s businesses. The GS-4210-24UP4C and Ultra PoE Splitter - POE-171S, operate as a pair to provide the easiest way to power your Ethernet devices which need high power input. Receiving data and power from the GS-4210-24UP4C, the POE-171S separates digital data and power into three optional outputs (12V, 19V or 24V DC) to non-PoE devices such as laptops, Thin Client, POS System, PTZ (Pan, Tilt & Zoom) network cameras, PTZ speed dome, color touch-screen IP phones, multi-channel wireless LAN access points and other network devices at distance up to 100 meters.

Multiple Spanning Tree Protocol with PoE IP Office Solution for SMBs and Workgroups

The GS-4210-24UP4C features strong, rapid self-recovery capability to prevent interruptions and external intrusions. It incorporates Multiple Spanning Tree Protocol (802.1s MSTP) into customer’s automation network to enhance system reliability and uptime. Applying the IEEE 802.3af/IEEE 802.3at/Ultra PoE standard, the GS-4210-24UP4C can directly connect with any IEEE 802.3at/Ultra PoE end-nodes like PTZ (Pan, Tilt & Zoom) network cameras and speed dome cameras. The GS-4210-24UP4C can easily help enterprises with the available network infrastructure to build wireless AP, IP camera and VoIP systems where power can be centrally-controlled.

 

 

Physical Port

  • 28 10/100/1000BASE-T Gigabit RJ45 copper ports with 24-port IEEE 802.3at/af/Ultra PoE injector
  • 4 100/1000BASE-X mini-GBIC/SFP slots, shared with port-25 to port-28 compatible with 100BASE-FX SFP
  • RJ45 console interface for switch basic management and setup

Power over Ethernet

  • Complies with IEEE 802.3at Power over Ethernet Plus, end-span/mid-span PSE
  • Backward compatible with IEEE 802.3af Power over Ethernet
  • Up to 24 ports of IEEE 802.3af/IEEE 802.3at/Ultra PoE devices powered
  • Supports PoE power up to 60 watts for each ultra PoE port
  • Auto detects powered device (PD)
  • Circuit protection prevents power interference between ports
  • Remote power feeding up to 100 meters
  • PoE management

- Total PoE power budget control

- Per port PoE function enable/disable

- PoE port power feeding priority

- Per PoE port power limitation

- PD classification detection

- PD alive check

- PoE schedule

Layer 2 Features

  • Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
  • High performance Store and Forward architecture, broadcast storm control, and runt/CRC filtering that eliminates erroneous packets to optimize the network bandwidth
  • Supports VLAN

- IEEE 802.1Q tagged VLAN

- Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad)

- Protocol VLAN

- Voice VLAN

- Private VLAN

- Management VLAN

- GVRP

  • Supports Spanning Tree Protocol

- STP (Spanning Tree Protocol)

- RSTP (Rapid Spanning Tree Protocol)

- MSTP (Multiple Spanning Tree Protocol)

- STP BPDU Guard, BPDU filtering and BPDU forwarding

  • Supports Link Aggregation

- IEEE 802.3ad Link Aggregation Control Protocol (LACP)

- Cisco ether-channel (static trunk)

  • Provides port mirror (many-to-1)
  • Loop protection to avoid broadcast loops

Quality of Service

  • Ingress and egress rate limit per port bandwidth control
  • Storm control support

- Broadcast/Unknown unicast/Unknown multicast

  • Traffic classification

- IEEE 802.1p CoS

- TOS/DSCP/IP precedence of IPv4/IPv6 packets

  • Strict priority and Weighted Round Robin (WRR) CoS policies

Multicast

  • Supports IPv4 IGMP snooping v2 and v3
  • Supports IPv6 MLD snooping v1, v2
  • IGMP querier mode support
  • IGMP snooping port filtering
  • MLD snooping port filtering

Security

  • Authentication

- IEEE 802.1X port-based network access authentication

- Built-in RADIUS client to cooperate with the RADIUS servers

- RADIUS/TACACS+ login user access authentication

  • Access control list

- IPv4/IPv6 IP-based ACL

- MAC-based ACL

  • MAC security

- Static MAC

- MAC filtering

  • Port security for source MAC address entries filtering
  • DHCP snooping to filter distrusted DHCP messages
  • Dynamic ARP Inspection discards ARP packets with invalid MAC address to IP address binding
  • IP source guard prevents IP spoofing attacks
  • DoS attack prevention
  • SSH/SSL

Management

  • IPv4 and IPv6 dual stack management
  • Switch management interface

- Web switch management

- Telnet command line interface

- SNMP v1, v2c and v3

- SSH and SSL secure access

  • User privilege levels control
  • Built-in Trivial File Transfer Protocol (TFTP) client
  • BOOTP and DHCP for IP address assignment
  • System maintenance

- Firmware upload/download via https/TFTP

- Configuration upload/download through web interface

- Dual images

- Hardware reset button for system reboot or reset to factory default

  • SNTP Network Time Protocol
  • Cable diagnostics
  • Link Layer Discovery Protocol (LLDP) and LLDP-MED
  • SNMP trap for interface link up and link down notification
  • Event message logging to remote Syslog server
  • Four RMON groups (history, statistics, alarms and events)
  • PLANET smart discovery utility
  • Smart fan with speed control

Hardware Specifications

Copper Ports

28 x 10/100/1000BASE-T RJ45 auto-MDI/MDI-X port

SFP/mini-GBIC Slots

4 x 100/1000BASE-X SFP interface shared with port-25 to port-28
Supports 100/1000Mbps dual mode and DDM

PoE Injector Port

24 ports with 802.3at/af/Ultra PoE injector function with port-1 to port-24

Switch Architecture

Store-and-Forward

Switch Fabric

56Gbps/non-blocking

Switch Throughput@64Bytes

41.67Mpps

Address Table

8K entries

Shared Data Buffer

4.1 megabits

Flow Control

IEEE 802.3x pause frame for full-duplex
Back pressure for half-duplex

Jumbo Frame

10K bytes

Reset Button

< 5 sec: System reboot
> 5 sec: Factory default

LED

PWR, SYS, LNK/ACT, PoE-in-use, 1000, FAN1, FAN2, PWR FAN, PoE PWR

Power Requirements

100~240V AC, 50/60Hz, auto-sensing

Dimensions (W x D x H)

440 x 300 x 44.5 mm, 1U height

ESD Protection

Contact Discharge 4KV DC
Air Discharge 8KV DC

Enclosure

Metal

Weight

5062g

Power Consumption/Dissipation

740 watts (max.)/2525 BTU

Fan

4 x smart fan

Power over Ethernet

PoE Standard

IEEE 802.3af/802.3at/Ultra PoE PSE

PoE Power Supply Type

End-span/Mid-span/UPoE

PoE Power Output

Per port 52V DC, 60 watts (max.)

Power Pin Assignment

End-span: 1/2(-), 3/6(+)
Mid-span: 4/5(+), 7/8(-)
UPoE: 1/2(-), 3/6(+),4/5(+), 7/8(-)

PoE Power Budget

600 watts (max.)

PoE Ability PD @ 15 watts

24 units

PoE Ability PD @ 30 watts

20 units

PoE Ability PD @ 60 watts

10 units

Layer 2 Functions

Port Mirroring

TX/RX/both
Many-to-1 monitor

VLAN

802.1Q tagged-based VLAN
Up to 256 VLAN groups, out of 4094 VLAN IDs
802.1ad Q-in-Q tunneling
Voice VLAN
Protocol VLAN
Private VLAN (Protected port)
GVRP

Link Aggregation

IEEE 802.3ad LACP and static trunk
Supports 4 groups of 4-port trunk

Spanning Tree Protocol

IEEE 802.1D Spanning Tree Protocol (STP)
IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
IEEE 802.1s Multiple Spanning Tree Protocol (MSTP)

IGMP Snooping

IGMP (v2/v3) snooping
IGMP querier
Up to 256 multicast groups

MLD Snooping

MLD (v1/v2) snooping, up to 256 multicast groups

Access Control List

IPv4/IPv6 IP-based ACL/MAC-based ACL

QoS

8 mapping IDs to 8 level priority queues
 - Port number
 - 802.1p priority
 - 802.1Q VLAN tag
 - DSCP field in IP packet
Traffic classification based, strict priority and WRR

Security

IEEE 802.1X port-based authentication
Built-in RADIUS client to cooperate with RADIUS server
RADIUS/TACACS+ user access authentication
IP-MAC port binding
MAC filtering
Static MAC address
DHCP Snooping and DHCP Option82
STP BPDU guard, BPDU filtering and BPDU forwarding
DoS attack prevention
ARP inspection
IP source guard

Management Functions

Basic Management Interfaces

Web browser; Telnet; SNMP v1, v2c
Firmware upgrade by https/TFTP Protocol through Ethernet network
Remote/Local syslog
System log
LLDP Protocol
SNTP

Secure Management Interfaces

SSH, SSL, SNMP v3

SNMP MIBs

RFC 1213 MIB-II
RFC 1215 Generic Traps
RFC 1493 Bridge MIB
RFC 2674 Bridge MIB Extensions
RFC 2737 Entity MIB (v2)
RFC 2819 RMON (1, 2, 3, 9)
RFC 2863 Interface Group MIB
RFC 3635 Ethernet-like MIB

Standards Conformance

Regulatory Compliance

FCC Part 15 Class A, CE, LVD

Standards Compliance

IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX/100BASE-FX
IEEE 802.3z Gigabit SX/LX
IEEE 802.3ab Gigabit 1000T
IEEE 802.3x flow control and back pressure
IEEE 802.3ad port trunk with LACP
IEEE 802.1D Spanning Tree Protocol
IEEE 802.1w Rapid Spanning Tree Protocol
IEEE 802.1s Multiple Spanning Tree Protocol
IEEE 802.1p Class of Service
IEEE 802.1Q VLAN tagging
IEEE 802.1x Port Authentication Network Control
IEEE 802.1ab LLDP
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus
RFC 768 UDP
RFC 793 TFTP
RFC 791 IP
RFC 792 ICMP
RFC 2068 https
RFC 1112 IGMP v1
RFC 2236 IGMP v2
RFC 3376 IGMP v3
RFC 2710 MLD v1
RFC 3810 MLD v2

Environment

Operating

Temperature: 0 ~ 50 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)

Storage

Temperature: -20 ~ 70 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)